Intel i226-T1 with SDP headers and a U.FL PPS breakout board

Name: Intel i226-T1 with SDP headers and a U.FL PPS breakout board
Brand: timebeat.app
SKU: TIM-NIC-226
Price: 135.0 GBP
Availability: InStock

£135.00

~~£155.00~~ £135.00

-£20.00

Availability: Low stock: 9 left

SKU: TIM-NIC-226

timebeat.appClock Sync Network Adapter 25GbE (with 1PPS) - based on Intel E810-XXVDA2

TimebeatRaspberry Pi CM4 IO Board 1PPS breakout board

£135.00

~~£155.00~~ £135.00

Product description
Product Specification

The Intel i226-T1 2.5Gbps exposes 3 software definable pins (SDPs) but Intel has not attached the headers.

So we've done the job for them and made a matching U.FL PPS breakout board to make connections easy.

The i226 is so much cooler than the i210 because it does PTM so you can use PTP_SYS_OFFSET_PRECISE to get near lossless sync between the PHC and the system clock using the igc driver in Linux.

We also provide our breakout board with U.FL to SMA connectors and dip switches for 50ohm termination

Comes with both full and half-height brackets.

EXTERNAL INTERFACES

PCI Express 3.1:
5GT/s Support for x1 width (Lane).

Network Interfaces:
Integrated MAC + BASE-T PHY.
MDI (Copper) standard IEEE 802.3 Ethernet interface for 2500BASE-T, 1000BASE-T, 100BASE-TX, and 10BASE-TE applications (802.3, 802.3u, 802.3bz, and 802.3ab).

ETHERNET FEATURES

IEEE 802.3 auto-negotiator:
Automatic link configuration for speed duplex and flow control

IEEE 802.3x and IEEE 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames:
Local control of network congestion levels.

Automatic cross-over detection function (MDI/ MDI-X):
Frame loss reduced from receive overruns.

IEEE 1588 protocol and 802.1AS implementation:
Time-stamping and synchronization of time sensitive applications.
Distribute common time to media devices.

Supporting Time Sensitive Networking (TSN) Capabilities:
IEEE 802.1Qbu, 802.3br, 802.1Qbv, 802.1AS-REV, 802.1p,Q, and 802.1Qav.
Supports Time-based transmission.
Any Tx and Rx queues can be used for scheduled traffic or best effort traffic.
Supports Forwarding and Queuing Enhancements for Time-Sensitive Streams.

STATELESS OFFLOADS AND PERFORMANCE FEATURES

TCP/UDP, IPv4 checksum offloads (Rx/ Tx):
Offloading capabilities and improved CPU usage.
Extended Tx descriptors.
Checksum and segmentation capability extended to new standard packet type.

Transmit Segmentation Offloading (TSO) (IPv4, IPv6):
Increased throughput and lower processor usage.

Interrupt throttling control:
Limits maximum interrupt rate and improves CPU usage.

Low-Latency Interrupts:
Based on the sensitivity of the incoming data, the controller can bypass the automatic moderation of time intervals between the interrupts.

Legacy and Message Signal Interrupt (MSI):
Interrupt mapping.

Message Signal Interrupt Extension (MSI-X):
Dynamic allocation of up to 5 vectors per port.

Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP):
Improves the system performance related to handling of network data on multiprocessor systems.

Support for packets up to 9.5 KB (Jumbo Frames):
Enables faster and more accurate throughput of data.

PCIe v3.1 support:
Includes additions to PCIe to support low power link states.

Descriptor ring management hardware for Transmit and Receive:
Optimized descriptor fetch and write-back for efficient system memory and PCIe bandwidth usage.